Page 319 - Vestil Catalog 112

325
Propane Exchange Cylinder Cabinets

Durable steel Propane Exchange Cylinder Cabinets for storage of standard propane gas
cylinders. The sides are made of expanded steel, and the bottom, back, and top are mode
of solid sheet steel. Solid steel or expanded metal door available. Lockable door protects
cylinders (padlock not included). Each shelf can hold a maximum of six (6) cylinders.
White baked-in powder-coated toughness. Includes red lettered signage noting "PROPANE
EXCHANGE, FLAMMABLE, NO SMOKING".
MODEL CYLINDER OVERALL SIZE NUMBER WEIGHT model CYL-EX-12-S
NUMBER CAPACITY (W x L x H) OF SHELVES (POUND)
SOLID STEEL DOOR
CYL-EX-12-S 12 40" x 32 /8" x 44 /8" 1 343
1
1
CYL-EX-18-S 18 40" x 32 /8" x 68 /4" 2 353
1
1
EXPANDED METAL DOOR
CYL-EX-12-E 12 40" x 32 /8" x 44 /8" 1 301
1
1
CYL-EX-18-E 18 40" x 32 /8" x 68 /4" 2 393 model CYL-EX-18-E DRUM HANDLING EQUIPMENT & SPECIALTY CONTAINERS
1
1
LP Tank Truck
Finally an easy answer to lifting, storing, and transporting problems associated with LP tanks.
The built-in crane can be used to safely load full tanks into fork trucks. The crane pivots 360°
for maximum versatility. The crane boom is raised and lowered with a manual hand pump
hydraulic lift. The tank attachment at the end of the boom automatically clamps to each end
of the cylinder. The built-in racks are ideal for LP tank storage-racks. Store two (2) tanks
in the vertical position and four (4) tanks in the horizontal position. Unit includes a push
handle with two (2) rigid and two (2) swivel with brake casters for portability. Welded steel
construction with a painted finish.
model LP-6
MODEL STORAGE OVERALL SIZE CASTER WEIGHT
NUMBER CAPACITY (W x L x H) SIZE AND TYPE (POUND)
LP-6 6 TANKS 33 /16" x 137 /16" x 97 /16" 8" x 2" GFN* 775
9
13
11
*GLASS-FILLED NYLON
Aerosol Can Recycle System
Turn aerosol cans into scrap metal, exempting them from disposal regulations for hazardous
waste. This system safely punctures aerosol cans to relieve pressure and then empties any
residual contents into your drum. Thread the recycler body into the 2" diameter threaded
bung and the filter into the ¾" bung of your 30 or 55 gallon steel or poly drum. Push the
lever to puncture the can, and two piece filter with a carbon cartridge drains out odors and
harmful emissions. Unit includes puncturing device, safety goggles, carbon filter, and anti-
static wire, which prevents static buildup by grounding the drum as required by OSHA.
MODEL OVERALL SIZE MAXIMUM MAXIMUM WEIGHT
NUMBER (D x H) CAN HEIGHT CAN DIAMETER (POUND) vestil
green
5
1
5
CAN-RECY 14 /16" x 10 /16" 14 /8" 3” 9
CAN-R-FLT REPLACEMENT FILTER 4
Oil Filter Crushers, CrushMasters 208-230V, 1-PHASE STANDARD
Recycle used filters and oil quickly, safely, and easily.
The CM-1 Oil Filter Crusher operates on normal shop air, delivers over 13,000 pounds of
crushing force at 120 PSI, accommodates all standard oil filters, and is designed for high
volume use. Will crush up to four (4) automotive spin-on filters at one time. Crushing
chamber door is prevented from opening if the ram is in any position other than fully raised.
Can be connected to a variety of waste oil containers.
The CM-2 accommodates standard size filters and heavy-duty truck filters up to 16" high.
Convenience and safety features include waste oil drain connections, easily located on/off
switch for safe operation, and heavy-duty totally enclosed fan cooled 4HP motor delivering
37,500 pounds of crushing force. Electric-hydraulic operation.
The Tubular Stand accommodates model CM-1. Requires 29"W x 22½"D of floor space.
The Deluxe Stand accommodates both the CM-1 and CM-2. It is designed with a heavy-duty model CM-1 model CM-2
grated top for drainage of filters before crushing. The floor space required is 29"W x 22⅝"D. Shown with Tubular Stand, Shown with Deluxe Stand,
Also allows for placement of 55 gallon drum, sold separately, under crusher to contain oil. model CM-T model CM-D
MODEL USABLE SIZE OVERALL SIZE CYCLE TIME WEIGHT
NUMBER DESCRIPTION (W x D x H) ( W x D x H) (SECONDS) (POUND)
CM-1 AIR OPERATED, 100-180 PSI 8" X 8" X 9" 13¾" X 18" X 27" 11-20 301
CM-2 ELECTRIC-HYDRAULIC, 208-230V, 1PH 9" X 9" X 16" 25" X 27" X 41½" 12 500
CM-T TUBULAR STAND -- 41" HIGH -- 120
CM-D DELUXE STAND -- 44" HIGH -- 140