Page 127 - Vestil Catalog 112

133
Lift & Tilt Carts with Sequence Select

Models CART-500-LT, CART-1000-LT, and CART-1000-LT-PSS have a unique design which
allows the user to RAISE and TILT materials to an ergonomic position for better posture and
operator comfort. The manual hydraulic foot pump controls the platform lift, lower, and tilt.
A manual selector valve is used to control the lift/lower sequence independently from the tilt
sequence. The platform includes a 6½" high retaining lip on model CART-500-LT and 7" ERGONOMIC SOLUTIONS
high on CART-1000-LT series. Rolls on two (2) rigid and two (2) swivel 5" poly casters.
Models CART-400-LT and CART-600-LT are elevated by means of a foot actuated hydraulic model
cylinder. As the table is raised, it simultaneously tilts to an angle of 45° at full elevation. Built- CART-500-LT
in retaining lip keeps containers in place. Units roll on 5" polyurethane casters, two (2) rigid
and two (2) swivel with brakes.

MODEL PLATFORM UNIFORM MAX. SERVICE WEIGHT
NUMBER SIZE (W x L) CAPACITY TILT RANGE◊ (POUND) model
STEEL CONSTRUCTION CART-1000-LT
CART-500-LT 21½" x 40" 500 lb. 30° 16½" to 36" 294
CART-400-LT� 19½" x 30" 400 lb. 45° 13" to 31" 245
CART-600-LT� 24" x 36" 600 lb. 45° 14" to 35" 355
1
5
CART-1000-LT� 22" x 33½" 1,000 lb. 35° 17 /8" to 34 /4" 340
PARTIALLY STAINLESS STEEL CONSTRUCTION
5
CART-1000-LT-PSS* 22" x 33 /8" 1,000 lb. 40° 17½" to 35" 323
◊SERVICE RANGE FIGURED WITH PLATFORM LEVEL
*PLATFORM, HANDLE, CASTER BRACKETS & HARDWARE ARE ALL STAINLESS STEEL.
PUMP ASSEMBLY, SCISSOR LEGS, AND FOOT PEDAL ARE ZINC PLATED
model
Ball Transfer Platforms CART-400-LT & CART-600-LT
Units simply bolt on to any platform. Chrome 1" diameter ball transfers are on 4" centers
with a square pattern. All ball transfers have a chrome finish and can be attached to
hydraulic and mechanical tables. Optional 18"W x 2½"H retractable stops available.
MODEL OVERALL UNIFORM NUMBER WEIGHT
NUMBER SIZE (W x L) CAPACITY / BALL OF BALLS FINISH (POUND)
1
BALL-1828� 18 /8" x 28" 75 lb. 24 CHROME 24
3
7
BALL-2036� 20 /8" x 36 /16" 75 lb. 32 CHROME 33 model BALL-2036
BALL-2448 24" x 48" 75 lb. 72 CHROME 125
BALL-4048 40" x 48" 75 lb. 120 CHROME 172
BALL-3060 30" x 60" 75 lb. 105 CHROME 202
"Pop-Up" Ball Transfer Platforms
An economical way to increase usable height and product manipulation to any cart or
table. A ball retraction handle is conveniently located on the side to secure the load.
Mount to our scissor carts or post tables. model POPUP-1932
MODEL OVERALL SIZE BALL SPACING UNIFORM WEIGHT
NUMBER (W x L x H) (W x L) CAPACITY (POUND)
POPUP-1932� 19" x 32" x 8½" 4½" x 5¼" 500 lb. 115
POPUP-4048� 40" x 48" x 8¾" 4½" x 5¼" 250 lb. 251

Ball Transfer Strips & Single Ball Transfers model POPUP-4048
Single strips of ball transfer are easy to install and simple to use. To install, simply line it
up on your cart, table, or workstation and bolt on at each end. Balls are spaced on 3¼"
centers. Standard finish is chrome.
The Single Ball Transfers feature a hardened cup, protective debris shield, and include model
lag-down tabs. Height of single ball is 1¼". BALL-S40
BALL TRANSFER STRIPS
MODEL UNIFORM NUMBER WEIGHT
NUMBER LENGTH CAPACITY / BALL OF BALLS FINISH (POUND)
BALL-S30� 30" 75 lb. 10 CHROME 10
BALL-S40� 40" 75 lb. 13 CHROME 11
BALL-S60� 60" 75 lb. 20 CHROME 15
SINGLE BALL TRANSFER
BALL-1F� 1" D 75 lb. 1 ZINC PLATED 1 model BALL-1F